|
AS REVIEWED IN BEST BUYS SUMMER 06/07
Click to read review
PACK CONTENTS
Two 500ml containers of Screenkote
One 500ml container of acrylic primer
One Roller Kit
*Images are a recreation only - actual results may vary
THE BENEFITS OF SCREENKOTE
- Superior Home Theatre Screen Performance
- Greater control and flexibility over projection screen sizes
- Save thousands of dollars on a performance screen
- Easy to apply and clean
Screenkote projection screen surface coating is a result of years of research and development. Screenkote performance is outstanding with the capacity to produce an excellent colour correct image with a truly broad contrast range. Results are naturally rich and clean images with superbly even light delivery and generously wide viewing angles.
A good projector is a highly advanced product and requires a projection surface that suits the parameters that the projector was designed to operate within. Only when these requirements are met will the image be of the quality that the manufacturer intended.
There are people who will tell you they have a great image just projecting on to a white wall at home. They are only short changing themselves on the performance they are getting from their projector investment.
"If you are not using a well controlled projection surface for your projector you ain’t seen nothin' yet"
About Screenkote
Screenkote is a specially formulated acrylic base paint, designed specifically for the video projection industry. Screenkote projection screen surface coating allows you to transform any smooth paintable surface into a cinema projection screen.
Screenkote products are being used in professional, commercial and industrial applications, right through to high performance domestic home theatre screens.
Performance
ScreenKote White enhances brightness and colour depth, as well as increasing overall image clarity. Watch as once dull images spring to life with improved contrast. ScreenKote White has a gain rating of 1.1, resulting in a broad viewing angle and even brightness across your screen, as well as eliminating hotspots.
Affordability
Professional quality screens that provide similar results to ScreenKote start at around $3000, and you can expect to pay up to $8000 for a 110" screen. While there are many cheaper screens available, their performance is poor to say the least, offering second rate spectrum control, poor contrast and quite often uneven or incorrect gain levels. ScreenKote also eliminates issues involved with wear and tear of screens, especially retractable screens that end up warping after constant rolling and unrolling.
Coverage
One pack will typically be sufficient to cover a 120 inch screen with three top coats, on a non-porous surface. On particularly porous surfaces we recommend the use of additional acrylic primer for better results and increased coverage.
Application
Appy the acrylic primer with the roller. Allow to dry completely before applying the top coat (2 to 3 hours). Apply the first coat thinly and wvwnly and allow to dry for 1 to 2 hours before applying the second coat.Appy the acrylic primer with the roller. Allow to dry completely before applying the top coat (2 to 3 hours). Apply the first coat thinly and wvwnly and allow to dry for 1 to 2 hours before applying the second coat.
Screenkote Rolling Instructions:
Rolling ScreenKote is simple, however careful attention must be paid to the application method and roller handling ensuring that the Screenkote is applied evenly across the entire screen surface.
First coat to be applied as a thin even coat and allowed to dry for at least 1-2 hours before the application of the second coat.
Normally 2 coats of Screenkote applied to a white acrylic primer base is suitable, however this may vary depending on the porosity, and absorptive properties of the surface to be painted.
Screenkote can be thinned down with water for spray application.
Wash up with water
*This product is not to be consumed and should this occur medical attention should be sought immediately* | 
